Cedar Park Metal Gates is the Texas capital region's trusted expert in driveway entries built to order, specializing in tube steel swing gates, trackless cantilever gates, and ornamental iron fencing. We offer ground-track slide gates and pool barrier fencing.
Get a free gate estimate
A single swing gate in Cedar Park typically runs an estimated $2,700 to $4,900 per complete system, and the gate type, the opening width and the drive grade move that price most.
| Gate or fence job | Est. investment | Est. duration on site |
|---|---|---|
| Trackless cantilever gate | Est. $6,200 to $9,800 per complete system | Est. 2 to 4 days |
| Single swing gate with operator | Est. $2,700 to $4,900 per complete system | Est. 1 to 2 days |
| Double leaf swing entry with operators | Est. $4,200 to $7,800 per complete system | Est. 2 to 3 days |
| Track slide gate with rack drive | Est. $1,700 to $4,800 per complete system | Est. 2 to 3 days |
| Walkway or courtyard entry gate | Est. $650 to $1,450 per gate installed | Est. 4 to 8 hours |
| Operator added to an existing gate | Est. $1,900 to $3,700 per operator system | Est. 4 to 8 hours |
| Ornamental tube steel fence line | Est. $52 to $83 per linear foot | Est. 2 to 4 days |
These ranges are estimates that can change with the opening width and the drive grade, and the written quote from our site measure is what fixes the final price and the schedule.
Request a free estimate, and we will walk your opening, shoot the grade and tell you which gate type fits before anything is cut.
Hollis, Buttercup Creek, Cedar Park
A corner lot owner who wanted the drive closed for two dogs without losing guest parking
Renata, Redbud Trail, West Lake Hills
An architect's elevation with a slim arch that had to stay see-through from the road
Yvonne, Lime Creek Road, Volente
A lake lot whose drive falls toward the road and washes gravel across any track
Maribel, Rough Hollow, Lakeway
A lake-view home with new limestone columns and a gate that had to pass the flat-top rule
Investment and duration figures are estimates. Your written quote sets the final price and schedule.
Hollis on a Buttercup Creek corner lot wanted the drive closed for two dogs without losing guest parking. We hung one long powder-coated tube steel leaf that opens inward on an articulated arm, with a keypad at car window height, an estimated $3,100 to $4,300 job that took an estimated 1 to 2 days.
Renata in Redbud Trail, West Lake Hills, brought an architect's elevation with a slim arch that had to stay see-through from the road. We built two arched leaves from a full-scale shop drawing with 1-inch pickets at 4-inch centers, an estimated $5,600 to $7,600 job over an estimated 2 to 3 days.
Yvonne at Lime Creek Road in Volente has a sloped gravel drive that washes across any track. We built a 20 ft hot-dip galvanized cantilever gate with a 10 ft tail and rock-bored footings, an estimated $7,100 to $9,400 job that took an estimated 3 to 4 days.
Maribel in Rough Hollow, Lakeway, set new limestone columns and needed a flat-topped pair that clears the city fence ordinance. We bolted soft-stop leaves into deep footings, a job estimated at $6,400 to $7,900 that took an estimated 2 to 3 days on site.
The full write-ups sit on our gate projects page.
Our team provides gate operator installation, delivering durable entries for homes and dependable access control for both residential and commercial projects. Backed by 17 years in business and our 18-month workmanship warranty on welds, hinge set, footings and gate travel, we have completed over 1,483 projects, from a 42-inch walk gate to a 26-foot commercial cantilever.
From rock-bored footings and welded hinge plates to a reverse test on every photo eye at handover, our team handles each step. Serving Cedar Park out to Leander, Georgetown, Round Rock and Lakeway, we build each gate to the leaf, the grade and the association that governs the drive.
Tube steel is the default for Cedar Park drives because it stays rigid at 16 feet and wider, while aluminum suits light pedestrian leaves and forged iron suits ornament.
| Material | Strength on a wide leaf | Upkeep | Best for |
|---|---|---|---|
| Tube steel | Rigid at 16 ft and wider | Touch up chips in the powder coat | Driveway leaves and security gates |
| Aluminum | Lighter, flexes on long spans | No rust, wash a few times a year | Pool barriers and walk gates |
| Forged or cast iron | Heavy and strong, hinges must be rated up | Rust care on old work | Ornament, scrolls and estate entries |
Every steel piece leaves for the coater sandblasted, shot with zinc-rich primer and finished in polyester powder coat, as our steel gate installation page explains, and forged scrolls follow the same system on our wrought iron gates page.
A gate is not a weekend project because a 16 ft steel leaf weighs hundreds of pounds, an automatic leaf has to reverse on its photo eyes and edges, and limestone under a Cedar Park lot stops a rented auger before a 48-inch gate post reaches depth. Lakeway, West Lake Hills and Rollingwood each have their own fence rules, so confirm current text with the city before any post goes in.
Most Cedar Park gates and fences are first generation, because the city grew from 26,049 people in 2000 to 77,595 in 2020 and the posts on those tract lots are reaching first replacement. Our owner tests the first post hole on every limestone lot, and our lead welder squares every frame before it leaves the shop. Meet the team behind the shop, from our estimator to our automation technician.
We serve a 40-mile radius from the Cedar Park shop, from Buttercup Creek and Twin Creeks to gates in Leander, Georgetown ranch entries, Round Rock projects and Lakeway lake-side drives. Steiner Ranch, West Lake Hills, The Hills, Shady Hollow, Volente and Rollingwood are on our service area page.
Cedar Park owners often pair a new entry with automatic driveway gates, custom driveway gate fabrication or pool safety fencing, property managers book commercial gate systems, and owners with an old gate start with gate opener repair.
Request a free estimate and we will walk your opening, shoot the grade and write the quote.
What you can hold us to
Start to finish
An estimator walks the opening, reads the grade and marks where the leaf or the slide run has to clear.
Steel gets cut only after you sign off on a scaled drawing that names the tube, the coating and the opener.
Our Cedar Park welders build it, the steel goes for galvanizing and powder coat, and it ships finished.
Posts cure, the leaf goes up, the opener gets wired, and you watch each photo eye and edge stop the gate.
Meet the team
Names, photos and stories are on our about page.
Owner
Cedar Park location manager
Round Rock location manager
West Lake Hills location manager
Lakeway location manager
Lead Welder and Fabricator
Gate Automation Technician
Estimator and Project Coordinator
Where we work
A flat drive with room to open inward suits a swing leaf, like the one Hollis has on his Buttercup Creek corner lot, while a sloped or gravel drive suits a trackless cantilever, like Yvonne's on Lime Creek Road.
Plan on an estimated 2 to 3 days for a double swing entry and an estimated 4 to 8 hours for a walk gate, once the steel is back from the coater.
Choose automatic if the drive is used daily, because an operator adds an estimated $1,900 to $3,700 to an existing sound leaf and brings photo eyes and edges with it.
Yes, a sloped drive is shot with a level first, and a trackless cantilever, like the one we set on Lime Creek Road in Volente, keeps gravel out of any track.
Yes, our crews work Leander, Georgetown, Round Rock and Lakeway every week, along with Steiner Ranch, West Lake Hills, The Hills, Shady Hollow, Volente and Rollingwood.
Every gate carries our 18-month workmanship warranty on welds, hinge set, footings and gate travel, plus the maker's parts warranty on operators.
The city or association has the final word, so we confirm current text with them before ordering steel.
Call us or send the form, and we will book a site measure and a written estimate.
Calls only, we do not receive text messages.
